Industrial Heat Exchanger

Product Details:

Finned tube heat exchanger condensers with longitudinal fins or circular fins. MOC can be SS, MS, Copper as per requirements

Additional Information:

• Delivery Time: 6 to 8 weeks
• Packaging Details: as per required

Product Details:

 The present set-up is designed to study the operation of Calandria evaporator. It consists of a short tube vertical evaporator in which tubes are surrounded by a MS jacket and fitted with accumulator. Dilute solution is fed to the evaporator and heated by Steam from a steam generator to concentrate the dilute feed solution to a desired level. The jacket is fitted with a steam trap and the condensate is collected at the end of trap. The vapors
of volatile solvent are condensed in a shell & tube type condenser and the balance non-volatile solute collected in the accumulator recycled back to the evaporator.

Additional Information:

• Delivery Time: 2- 3 months
• Packaging Details: as requitred

Product Details:

Double Tube Heat Exchanger in Hastelloy/SS/CS for Chemical Industry. Pressures upto 25 Bars. 
Variety of applications. 

Product Details:

Calandria for MEE Plants in SS316Ti, SS304, Ti Tubes for Effluent Treatment. 

Product Details:

We are manufacturing Stainles Steel of  condenser.

• Material : \Stainles Steel,

Product Details:

Falling Film Evaporator is distributed at the top of tubular heat exchanger and flows downwards creating a film. The turbulence of descending film, created by the vapor generated by boiling, results in high heat transfer coefficients and reduced contact times.

Product Details:

We bring forth an advanced technology product in the form of U Tube Bundle.

Product Details:

Various 300 Grade Stainless Steel, Duplex, Super Duplex, Nickel and Nickel Copper Alloy Hastelloy C276; Titanium,

Product Details:

The Floating Head Heat Exchanger is one of the most used heat exchangers. As shown in the name of it, in this design, one end of the tube sheet is fixed to the shell. The shell and tube bundle are free of expansion, so it’s easy to inspect and clean mechanically the heat exchanger as the tube bundle can be removed absolutely. A floating head heat exchanger is widely used for the service where the temperature is high between shell and tube bundle or dirty pipe service like petroleum refinery.

Product Details:

Chemical, Fertilizers, Food and Dairy, Petrochemical, Pharmaceutical.Chemical, Fertilizers, Food and Dairy, Petrochemical, Pharmaceutical

Product Details:

Batch evaporators are filled with the dilute material, heat is applied, and the material is gradually concentrated to the desired point by the application of heat and removal of vapors. Additional dilute material might be added as the concentration occurs to replenish the evaporated liquid to a given level. Since each gallon of dilute material brings some solids with it into the evaporator, the evaporator eventually achieves the final solids concentration.